H3C Technologies H3C Intelligent Management Center - Manual (Page 170)

2. Configure MPLS TE basic capabilities.
3. Establish an MPLS TE tunnel with RSVP-TE.
You need to make sure that MPLS and MPLS TE basic capabilities are enabled on your devices before
you can manage your TE networks using MPLS TE Management. The configuration instructions for
enabling MPLS and MPLS TE basic capabilities may differ from device to device. For detailed
configuration instructions, see the configuration guide of your device.
Querying for RSVP TE device features
Over time, the device features list can grow large, making it more difficult to find features of a device at
a glance. The Query capability enables you to search for RSVP TE device features of a device by device
name or device IP address/mask.
To query for RSVP TE features of a device:
1. Click Service > MPLS TE Manager from the tabular navigation system on the top of the IMC main
page.
2. Click RSVP TE Advanced Features > Device Features in the left navigation tree.
3. Specify part or all of the device name or IP address, and then click the Query button to display only
devices that match the description.
4. To clear the query criteria, click the Reset button.
Configuring RSVP for a device
You can configure RSVP information for a device.
To configure RSVP information for a device:
1. Click Service > MPLS TE Manager from the tabular navigation system on the top of the IMC main
page.
2. Click RSVP TE Advanced Features > Device Features in the left navigation tree.
3. Click the Configuration icon on the same line as the RSVP device that you want to configure.
The Configure Device RSVP page appears, as shown in Figure 40 .
Figure 40 Configure Device RSVP page
4. Enter the following parameters:
• Path/Reserve Message Refresh Interval(s)
160