H3C Technologies H3C Intelligent Management Center - Manual (Page 83)

The Import Device page appears.
9. Click Select and select the four P devices.
10. Click OK to return to the Sub-region/PE Device List page.
Importing CEs
1. Click the Service tab.
2. From the navigation tree, select MPLS VPN Manager > VPN Devices > CE Device List.
The CE Device List page displays all CE devices.
3. Click Import on top of the CE Device List area.
The Import Device page appears.
4. Click Select and select CE 1, CE 2, CE 3, and CE 4.
5. Click OK to return to the Import Device page.
6. Click OK.
The page for import progress appears. You can view the import process and result.
Adding VPN 2
1. Click the Service tab.
2. From the navigation tree, select MPLS VPN Manager > VPN Resources > VPN management.
The BGP/MPLS VPN List page displays all VPNs.
3. Click Add on top of the BGP/MPLS VPN List area.
The Add VPN dialog box appears.
4. Configure the following parameters as needed:
{
VPN Name—Enter VPN2.
{
Connectivity Audit—Enable Periodical audit, use the default audit interval (8 hours), and
enable Audit Inter-Spoke Unconnectivity.
{
Description—Enter Add VPN2 as needed.
5. Click OK.
Adding an SC
1. Click the Service tab.
2. From the navigation tree, select MPLS VPN Manager > VPN Resources > VPN management.
The BGP/MPLS VPN List page displays all VPNs.
3. Click the VPN2 link to enter the VPN details page.
4. Click the SC List tab on the page.
73