Adding/modifying an sa – H3C Technologies H3C Intelligent Management Center User Manual
Page 43
Adding/Modifying an SA
H3C recommends that you perform auto discovery to make sure the link is not deployed in the network
before deploying a link. Before you perform auto discovery, synchronize devices to make sure you obtain
the most recent configuration of the devices.
To add/modify an SA:
1.
Click the Service tab.
2.
From the navigation tree, select MPLS VPN Manager > VPN Resources > SA management.
The SA List page displays all SAs.
3.
Click Add on top of the SA List area. Or, click the Modify icon in the Operation filed for the SA
to be modified.
4.
Select a PE for the SA:
a.
Click Select PE on the Select PE and VPN page. The Select Devices page appears. There are
two methods for selecting device, By View or using the Advanced option. See "
Adding Devices by Advanced Query
."
b.
Highlight the device you want to select and do one of the following:
−
To add them to the Selected Devices list, click Add selected .
−
To remove one or more, select them and click Remove selected .
c.
Confirm that the device you have found have been added.
d.
Click OK to return to the Select PE and VPN page.
5.
Select a VPN for the SA:
a.
Click Select VPN on the Select PE and VPN page. The Select VPN page appears.
b.
Enter the VPN name and click Query.
c.
Select a VPN from the list.
d.
Click OK to return to the Select PE and VPN page.
6.
Click Next.
7.
Select an SC for the SA and the join type for the PE device to connect to the VPN.
The page consists of two lists, SC of Current VPN and Selected SC.
SC of Current VPN contents
{
SC Name—Name of the SC.
{
Networking Type—Networking type of the SC, Hub-Spoke or Full-Mesh.
{
HUB's Import RT—Import RT value of the hub.
{
HUB's Export RT—Export RT value of the hub.
Selected SC contents
{
SC Name—Name of the SC.
{
Join Type—Join type for the SC, Hub or Spoke.
33