H3C Technologies H3C Intelligent Management Center - Manual (Page 141)

{
Synchronization Status—Synchronization state of the PE, Synchronizing, Success, or Failure.
When the synchronization fails, click the Failed link to view the causes in the prompt box that
appears.
{
Config Comparison—Configuration comparison results. Options are Same Config and
Different Config. When the synchronization begins, L2VPN Management compares the PE's
configuration with the baseline configuration. When they are different, you can click the
Different Config link to view the differences in the configuration comparison result page.
{
Details—Click the Details icon to view the VSI information for the device in the device VPN
information page.
3. Click Refresh to view the latest PE Devices.
Querying PE devices
1. Click the Service tab.
2. From the navigation tree, select L2VPN Manager > VPN Devices > PE Devices.
The PE Devices page displays all PE devices.
3. Enter or select one or more of the following query criteria:
{
Device Label—Enter the label of the PE to be queried. L2VPN Management supports fuzzy
matching for this field.
{
LSR ID—Enter the LSR ID of the PE to be queried. L2VPN Management supports fuzzy matching
for this field.
{
Device IP—Enter the IP address of the PE to be queried. L2VPN Management supports fuzzy
matching for this field.
{
Device Status—Select the alarm state of the PE to be queried. Options are All, Unmanaged,
Unknown, Normal, Warning, Minor, Major, and Critical.
4. Click Query.
The PE Devices displays all PEs matching the query criteria.
5. Click Reset to clear the query criteria and display all PEs.
Importing PE devices
To import PE devices:
1. Click the Service tab.
2. From the navigation tree, select L2VPN Manager > VPN Devices > PE Devices.
The PE Devices page displays all PE devices.
3. Click Import PE on top of the PE Devices area.
The Import Device page appears.
4. Click Select Device to select the PEs to be imported.
There are two methods for selecting devices, By View or using the Advanced option. See "
Adding
Devices by View " and " Adding Devices by Advanced Query ."
131