Figure 85 – H3C Technologies H3C Intelligent Management Center User Manual
Page 213
Figure 85 Usage scenario 4 — Configure Path Policy page
g.
Click Select next to Explicit Path, select the explicit path that you have just created, then click
OK.
h.
Click Next. You are directed to the Configure Advanced Attributes page.
i.
Click OK. This tunnel appears in the MPLS TE Tunnel Query List section of the page.
To configure an explicit path for the bypass tunnel:
4.
Click Service > MPLS TE Manager > Explicit Path Mng from the tabular navigation system on the
top of the IMC main page.
5.
In the Explicit Path List section of the page, click Add.
The Add Explicit Path page appears, as shown in
Figure 86 Usage scenario 4 — Add Explicit Path page
6.
Click Select next to Device Name, specify part or the entire name of Router B, and then click Query.
Devices that match the description appear in the Device Query List section of the page. Select
Router B and click OK.
7.
In the Explicit Path Name field, enter the name of the explicit path.
8.
Select Enabled from the Enable State list.
9.
Click Next.
10.
On the Next Hop Info List page, click Add.
The Next Hop Info page appears, as shown in
203