H3C Technologies H3C Intelligent Management Center - Manual (Page 26)

− Device IP—Enter the IP address you want to query for. Click on the Exact Query checkbox
if you want IMC to search for the exact IP address you have entered. Leave the Exact Query
box unchecked if you want IMC to match only a certain portion of the IP address.
− Device IP List—Configure multiple device IP addresses to be searched. Click the link.
Then, the Device IP List Configuration window appears. Enter one or multiple device IP
addresses in the Input Device IP field (if you enter multiple IP addresses, enter one IP address
on each line), and then click Add to add the entered IP addresses to the Device IP List field
below. Repeat the steps above to add all device IP addresses to be searched. To delete an
IP address in the Device IP List field, select the IP address and then click Delete. Click OK to
complete the operation. Make sure that the device IP addresses to be searched have been
added to the Device IP List field. To clear the Device IP List field, click the link.
− Device Label—Enter the device name for the devices you want to add. MVM supports fuzzy
matching for device labels. Therefore, you can enter the entire device label for the device
you want to locate, or you can enter just a portion of it. IMC will display all matches that
contain the portion you enter.
− Device Status—Select a device state from the Device Status list.
− Device Category—Select a device category from the Device Category list.
− Device Series—Select a device series from the Device Series list.
− Contact—Enter the contact name information you want to search by. MVM supports fuzzy
matching for this field. Therefore, you can enter a partial string for the contact or the
complete string for the contact.
− Location—Enter the location information you want to search by. MVM supports fuzzy
matching for this field. Therefore, you can enter a partial string for location or the complete
string for location.
− Device Reachability—Select a device reachability state from the Device Reachability list.
iii Click Query to begin your search.
The results of your search will appear in the Devices Found field.
iv Highlight the devices you want to select and click on the Add selected button to add
them to the selected devices list.
v To remove one or more devices, select them and click on the Remove selected button .
vi Confirm that the devices you have found have been added.
vii Click OK to enter the Import Device page. The selected devices now appear in the page.
6. Check the imported devices.
{
To add more devices, repeat step 5.
{
To delete devices, select one or multiple devices in the list, and click Remove.
7. Click OK.
The page for import progress appears. You can view the import process and result in this page.
16