H3C Technologies H3C Intelligent Management Center - Manual (Page 65)

{
Direction—Direction of the traffic that are analyzed, Inbound Traffic or Outbound Traffic.
{
Total Traffic—Total traffic for the VPN, in bytes.
{
Maximum Rate—Maximum rate of the traffic, in bps.
{
Minimum Rate—Minimum rate of the traffic, in bps.
{
Average Rate—Average rate of the traffic, in bps.
Application traffic analysis list contents
{
Application—Application running on the VPN.
{
Traffic—Traffic of the application.
{
Inbound Traffic—Incoming traffic of the application.
{
Outbound Traffic—Outgoing traffic of the application.
{
Rate—Rate of the traffic.
{
Percentage—Percentage of the application traffic to the traffic in the whole VPN.
Traffic monitoring description area contents
{
PEs not supporting flow monitoring—PE devices that do not support traffic monitoring in the
VPN.
{
PEs not or partially monitored by NTA—PE devices not monitored or partially monitored by
NTA in the VPN.
You can also view the previous information by clicking a PE device in the service topology.
Alarm TopN
This function displays the top N VPNs, PE devices, and CE devices by alarm severity. You can view the
MPLS VPN problems and alarm messages, and set the value of N.
Viewing alarm TopN information
1. Click the Service tab.
2. From the navigation tree, select MPLS VPN Manager > Alarm TopN.
The Alarm TopN page appears.
3. The page consists of four areas.
Parameters area
You can view and set the value of N in this area.
a. Select 5, 10, 15, or 20 from the N for TopN list.
b. Click OK.
VPN Fault area
This area displays the top N VPNs by alarm severity. You can view detailed information about the
VPNs.
VPN Fault area contents
55