Setting vpn traffic monitor, Viewing vpn traffic monitor settings, Querying vpns – H3C Technologies H3C Intelligent Management Center User Manual
Page 69
6.
Click OK.
Modifying SA inbound/outbound bandwidth utilization thresholds
1.
Click the Service tab.
2.
From the navigation tree, select MPLS VPN Manager > Traffic Monitor > Threshold Setting.
The Threshold Setting page appears.
3.
Click the Modify icon
for SA Incoming Bandwidth Utilization (bytes/s). Or, click the Modify
icon
for
SA Outgoing Bandwidth Utilization (bytes/s).
The page for modifying the threshold appears.
4.
Enable Enable level-1 alarm. Enter a value in % in the When the value is greater than field, and
select an alarm severity from the list between Send and Alarm. Options for alarm severity include
Critical, Major, Minor, Warning, and Info.
5.
Enable Enable level-2 alarm. Enter a value in % in the When the value is greater than field, and
select an alarm severity from the list between Send and Alarm. Options for alarm severity include
Critical, Major, Minor, Warning, and Info.
6.
Click OK.
Setting VPN traffic monitor
Viewing VPN traffic monitor settings
1.
Click the Service tab.
2.
From the navigation tree, select MPLS VPN Manager > Traffic Monitor > VPN Traffic Monitor
Setting.
The VPN List page appears.
VPN List contents
{
VPN Name—Name of the manageable VPN.
{
VPN Type—Type of the VPN. The value is BGP/MPLS VPN.
{
Monitor Status—Monitor state of the VPN. Options are Monitored and Not Monitored.
{
Monitored SA Ratio—Ratio of the monitored SAs to the total SAs in the VPN.
{
Modify—Click the Modify icon
to enter the VPN information page. You can view the SA
information and alarm information in the page.
Querying VPNs
1.
Click the Service tab.
2.
From the navigation tree, select MPLS VPN Manager > Traffic Monitor > VPN Traffic Monitor
Setting.
59