Removing sas – H3C Technologies H3C Intelligent Management Center User Manual
Page 45
b.
The system automatically generates a default RD value in the RD Value field. You can change
the value.
c.
The system uses the VRF in the Existing VRF list as the newly deployed VRF.
d.
The Configure route filed appears when the selected CE is a manageable CE. You can
configure a static route or the OSPF routing protocol in this field. Enable Configure route and
click Next to go to step 10. Disable configure route and click Next to step 11.
e.
Click Next.
10.
Configure the route between the PE and the CE:
a.
Select a routing protocol. Options are Static and OSPF.
b.
Configure the PE.
i
Enter the destination IP and mask in the Destination IP/Mask field.
ii
Click Add. Repeat the steps to add multiple routes.
c.
Configure the CE.
i
Enter the destination IP and mask in the Destination IP/Mask field.
ii
Click Add. Repeat the steps to add multiple routes.
d.
Click Next.
The Summary page consists of the Basic Information, Configuration command, and Deploy Immediately
areas. The Basic Information and Configuration command areas help you verify the configuration before
you execute the configuration commands.
The Basic Information area displays the names of the PE device and the CE device. If you configure a
route between the PE and the CE, this area also displays the route type.
The Configuration command area displays the configuration commands to be executed on the PE and
the CE.
11.
If you enable Deploy Immediately, the configuration is deployed immediately onto the devices.
Return to the SA List page, and an SA with the link state being Deploying appears. If you disable
Deploy Immediately, click OK to return to the SA List page. An SA with the link state being
Undeployed appears. You need to manually deploy it.
12.
Click OK.
Removing SAs
1.
Click the Service tab.
2.
From the navigation tree, select MPLS VPN Manager > VPN Resources > SA management.
The SA List page displays all SAs.
3.
Select the SAs to be removed.
4.
Click Remove.
A confirmation dialog box appears.
5.
Click OK.
35