H3C Technologies H3C Intelligent Management Center - Manual (Page 54)

− Status—State of the VPN, Existing, New VPN, or Conflict. Existing indicates that a new link
for the VPN is found. New VPN indicates that the VPN is new. Conflict indicates that the
VPN has different SC information from that discovered last time.
− VPN Name—Name of the VPN.
− VPN Type—Type of the VPN. The value can be BGP/MPLS VPN.
− VPN Description—Description of the VPN.
b. Select one or multiple VPNs in the VPN List Found.
c. Click Next.
6. Configure VRF bindings.
a. Enable Create Non-managed CE automatically. Then, the system automatically creates a
non-managed CE for a link without any CE device.
b. View the New Link List.
New Link List contents
− Device Name—Name and IP address of the PE device.
− VRF Name—Name of the found VRF.
− Attached VPN of Link—Name of the VPN to which the link belongs.
− PE Interface—Name of the interface on the PE device.
− MCE Name—Name of the MCE. This field is blank for a non-MCE network.
− CE Name—Name of the CE device.
− Configure—Click the Configure icon to enter the page for configuring a link. For more
information, see step 7.
c. Select one or multiple links to be added to MPLS VPN Management.
d. Click Finish.
The Summary page appears.
7. Configure a link.
You can use this step to configure the CE devices for the new link. The configuration ways vary with
the network types.
a. Method 1: Add a non-managed CE manually.
i Click the Add Non-Managed CE link on the upper right of the Configure Link page. The Add
Non-Managed CE page appears.
ii Enter the name of the CE device in the Device Name field.
iii Select the type of the CE device from the Type list. Options are CE and VMCE.
iv Click Add on the top of the Interface List area. The Add Interface page appears.
v Enter the interface description in the Interface Description field.
vi Enter the IP address and mask of the interface in the Interface IP/Mask field.
vii Click OK to return to the Add Non-Managed CE page.
b. Method 2: Add a VMCE.
44