H3C Technologies H3C Intelligent Management Center - Manual (Page 146)

4. Click Refresh to view the latest CE Device List and view the final synchronization results.
Removing CE devices
Perform this task to remove CEs and VCEs from L2VPN Management. Removing CEs might result in an
incomplete L2VPN or VPN service interruption. H3C recommends verifying the CEs before you remove
them.
To remove CE devices:
1. Click the Service tab.
2. From the navigation tree, select L2VPN Manager > VPN Devices > CE Devices.
The CE Device List page displays all CE devices.
3. Select one or multiple CEs to be deleted and click Delete.
A confirmation dialog box appears.
4. Click OK.
Managing VPN resources
VPN resources include VPNs services and Attachment Circuit (ACs). A VPN service is a Layer 2 VPN. An
AC is a link that connects a PE to a CE. L2VPN Management provides a VPN list and an AC list for you
to manage all VPNs and ACs.
Managing VPNs
The VPN list shows all VPN services. You can add, modify, delete, and audit VPN services from the VPN
list.
Viewing the VPN list
1. Click the Service tab.
2. From the navigation tree, select L2VPN Manager > VPN Resources > VPN List.
VPN List contents
{
Status—State of the VPN. Options are Critical, Major, Minor, Warning, Normal, Unknown,
and Unmanaged.
{
VSI Admin Status—State of the VSI, Enabled or Disabled.
{
VPN name—Name of the VPN. You can click a VPN name to view details about that VPN.
{
Topology—Provides a Topology link for you to view L2VPN topology.
{
Audit Time—Time when the last VPN connectivity audit was performed, in the format
YYYY-MM-DD hh:mm:ss.
{
Audit Result—Result of the last VPN connectivity audit. Options are Unaudited, Normal,
Auditing, Unknown, Unconnected, and Error. If the result is Unconnected, you can click the
Unconnected link to view the cause.
136