H3C Technologies H3C Intelligent Management Center - Manual (Page 25)

Importing P devices
Perform this task to import P devices to an AS or a region. Before importing the devices, make sure the
devices to be imported meet the following conditions:
• Enabled with SNMP.
• Added into IMC, and recognized and managed by IMC.
• Not imported as PE or CE devices.
To import P devices:
1. Click the Service tab.
2. From the navigation tree, select MPLS VPN Manager > VPN Resources > Region management.
The AS List page displays all ASs.
3. Click the name link of an AS.
The Sub-region/PE Device List page appears.
4. Click Import P on top of the Sub-region/PE Device List area.
The Import Device page appears.
5. Click Select to select the P devices to be imported.
There are two methods for selecting devices, By View or using the Advanced option.
{
Adding Devices by View
i From the Select Devices dialog box, click the By View tab.
ii Expand the view you want to select devices from by clicking on the arrow to the left of the
three view options, IP View, Device View, or Custom View.
iii From the navigation tree, click the view you want to select devices.
The devices from the group you click on will appear in the Devices Found field to the right
of the navigation tree. You can select devices from more than one group simply by clicking
on more than one group.
iv Highlight the devices you want to select from the Devices Found list and click the Add
selected button to add them to the selected devices list.
v To remove one or more devices, select them and click the Remove selected button .
vi Confirm that the devices you have found have been added by reviewing the Selected
Devices list.
vii Click OK. Confirm that the devices now appear in the Import Device page.
{
Adding Devices by Advanced Query
You can also add devices using the Advanced Query option to search IMC using various
criteria and use the results of the search to add devices. To do so,
i Click Select on the right of the Selected Devices field.
ii From the Select Devices dialog box, click the Advanced tab.
Enter values in one or more of the search parameters listed:
15