H3C Technologies H3C Intelligent Management Center - Manual (Page 121)

L2VPN Management automatically generates a PW between PE 1 and PE 2. The PW information
is displayed in the PW List area.
The system uses the default tunnel policy that only one tunnel is selected (no load balancing) in this
order: LSP tunnel, GRE tunnel, and CRLSP tunnel.
6. Click Next.
The Configuration Summary page appears. On that page, you can view VPN information, and
configurations to be deployed to PE 1 and PE 2.
7. Select Deploy Immediately and click OK.
The Task List page appears. On that page, you can view the VPN deployment results.
Figure 20 VPN deployment results
Viewing the VPN topology
1. Click the Service tab.
2. From the navigation tree, select L2VPN Manager > L2VPN Topology.
The L2VPN topology page appears.
3. On the toolbar at the top of the topology page, click the VPN List icon.
The VPN List tab appears at the right of the topology.
4. Configure the following query criteria:
{
Name—Enter VPN name VPLS001.
{
Type—Select VPLS from the list.
5. Click Query.
All matching devices are displayed in the VPN List area.
6. Double click a VPN in the VPN List.
The topology for the VPN is displayed.
111