H3C Technologies H3C Intelligent Management Center - Manual (Page 134)

Figure 26 VLL001 deployment results
Viewing the VPN topology
1. Click the Service tab.
2. From the navigation tree, select L2VPN Manager > L2VPN Topology.
The L2VPN topology page appears.
3. On the toolbar at the top of the topology page, click the VPN List icon.
The VPN List tab appears at the right of the topology.
4. Configure the following query criteria:
{
Name—Enter VPN name VLL001.
{
Type—Select VLL from the list.
5. Click Query.
All matching devices are displayed in the VPN List area.
6. Double click a VPN in the VPN List.
The topology for the VPN is displayed.
124