H3C Technologies H3C Intelligent Management Center - Manual (Page 46)

Deploying SAs
1. Click the Service tab.
2. From the navigation tree, select MPLS VPN Manager > VPN Resources > SA management.
The SA List page displays all SAs.
3. Select the SAs to be deployed.
4. Click Deploy.
5. Click OK.
The Deployment Status field displays the deployment result. The link indicates a deployment failure.
Click the link to view which commands are failed to be executed.
Undeploying SAs
1. Click the Service tab.
2. From the navigation tree, select MPLS VPN Manager > VPN Resources > SA management.
The SA List page displays all SAs.
3. Select one or multiple SAs to be undeployed.
4. Click Undeploy.
A confirmation dialog box appears.
5. Click OK.
Management VPN
After a management VPN is configured, the system automatically filters the RT attributes of the
management VPN when the system performs auto discovery and adds an SA.
Configuring a management VPN
Perform this task to configure the SC information for a management VPN.
To configure a management VPN:
1. Click the Service tab.
2. From the navigation tree, select MPLS VPN Manager > VPN Resources > Mgt. VPN Configuration.
The Mgt. VPN Configuration page appears.
3. Configure the following parameters:
{
Status—Select whether to enable management VPN filtering. Options are Enabled and
Disabled. If you enable filtering management VPNs, configure the hub's import RT and export
RT. If you disable filtering management VPNs, go to step 4.
{
HUB's Import RT—Enter the import RT value for the management VPN.
{
HUB's Export RT—Enter the export RT value for the management VPN.
4. Click OK.
36