H3C Technologies H3C Intelligent Management Center - Manual (Page 30)

{
Status—Highest level alarm state for a PE or a CE. This field displays hyphens (--) for a group.
{
Group/VPN Name—Name of a group or a VPN.
{
Type—Type for an entry in the list, Group or BGP/MPLS VPN.
{
Access Topology—Provides a link to access the VPN access topology. This field displays
hyphens (--) for a group.
{
Service Topology—Provides a link to access the VPN service topology. This field displays
hyphens (--) for a group.
{
Operation—Click the Modify icon to modify a group, and click the Delete icon to
delete a group.
3. Click Refresh on top of the Group List to view the latest Group List.
Adding a group
1. Click the Service tab.
2. From the navigation tree, select MPLS VPN Manager > VPN Resources > Group management.
The Group List page displays all groups.
3. Click the Add Group link on the upper right of the list. Or, click a group name to enter the lower
level group list, and then click the Add Group link on the upper right of that list.
The Add Group dialog box appears.
4. Enter the group name.
5. Click OK.
NOTE:
•
You can add subgroups in a group. MVM support six levels of groups at most.
• Names of groups in the same level must be unique. Names of groups in different levels can be the same.
Modifying a group
1. Click the Service tab.
2. From the navigation tree, select MPLS VPN Manager > VPN Resources > Group management.
The Group List page displays all groups.
3. Click the Modify icon for the group to be modified. Or, click a group name to enter the lower
level group list, and click the Modify icon for the group to be modified.
The Modify Group dialog box appears.
4. Enter the new group name.
5. Click OK.
Deleting a group
Performing this task does not affect devices or delete VPNs in a group. When a group contains
subgroups or VPNs, you can still use this function to delete the group.
20