H3C Technologies H3C Intelligent Management Center - Manual (Page 42)

1. Add an SA when a customer site is connected to a VPN.
2. Deploy the newly added SA to the PE and CE devices.
3. View detailed information and configuration changes for the SA, and modify the SA, as needed.
4. Undeploy the SA when the customer site is not used any more.
5. Remove one or multiple SAs from MPLS VPN Management.
Viewing the SA list
1. Click the Service tab.
2. From the navigation tree, select MPLS VPN Manager > VPN Resources > SA management.
The SA List page displays all SAs.
SA List contents
{
SA Name—Name of the SA, in the format of PE device name (PE device's IP address)-CE device
name (CE device's IP address).
{
Attached VPN—VPN to which the SA belongs.
{
Link Status—State of the link, Normal, Configuration changed, Configuration changes, Link
invalid, Undeployed, Deploying, Deployment failure, or Undeployment failure.
{
PE Name—Name of the PE device. You can click the name link of the PE to view its details.
{
CE Name—Name of the CE device. You can click the name link of the CE to view its details.
{
Operation—Provides the following operation links:
− Click the Details icon to view detailed SA information.
− Click the Modify icon to modify an SA.
− Click the Change icon to view the change of the SA configuration.
3. Click Refresh to view the latest SA List.
Querying SAs
1. Click the Service tab.
2. From the navigation tree, select MPLS VPN Manager > VPN Resources > SA management.
The SA List page displays all SAs.
3. Enter or select one or more of the following query criteria:
{
Query Type—Select one query type from All, SA Name, Attached VPN, and Link Status.
{
Query Condition—Enter information about the selected query type in the query criteria field.
4. Click Query.
The SA List displays all SAs matching the query criteria.
5. Click Reset to clear the query criteria and display all SAs.
32