H3C Technologies H3C Intelligent Management Center - Manual (Page 147)

{
Modify—Provides a Modify icon for you to modify basic settings for a VPN.
3. Click Refresh to view the latest VPN list.
Querying a VPN
1. Click the Service tab.
2. From the navigation tree, select L2VPN Manager > VPN Resources > VPN List.
3. Enter or select one or more of the following query criteria:
{
VPN name—Enter the name of a VPN. This field supports fuzzy matching.
{
Audit Result—Select an audit result. Options are All, Unaudited, Normal, Auditing, Unknown,
Unconnected, and Error.
{
VPN Status—Select a VPN state. Options are All, Critical, Major, Minor, Warning, Normal,
Unknown, and Unmanaged.
{
VSI Admin Status—Select a VSI state. Options are All, Enabled, and Disabled.
4. Click Query.
The VPN list displays all the matching VPNs. To clear the query results, click Reset.
Modifying basic VPN settings
L2VPN Management provides basic and advanced VPN settings. Basic settings include the VPN name,
contact, description, and audit interval. Advanced settings include information about PEs, ACs, VLAN
mappings, and alarms.
To modify basic VPN settings:
1. Click the Service tab.
2. From the navigation tree, select L2VPN Manager > VPN Resources > VPN List.
3. Click the Modify icon of the target VPN.
4. Modify the following settings:
{
VPN Name—Enter a new VPN name.
{
Contact—Enter a new contact.
{
Description—Enter a new description.
{
Audit Interval (in hours)—Enter a new audit interval in the range of 0 to 24. An audit interval
of 0 disables audit function.
5. Click OK.
Enabling a VSI
1. Click the Service tab.
2. From the navigation tree, select L2VPN Manager > VPN Resources > VPN List.
3. Select one or more VPNs from the VPN list.
137