H3C Technologies H3C Intelligent Management Center - Manual (Page 27)

Importing PE devices
Perform this task to import PE devices to an AS or a region. Before importing the devices, make sure the
devices to be imported meet the following conditions:
• Enabled with SNMP.
• Added into IMC, and recognized and managed by IMC.
• Not imported as P or CE devices.
• Configured with BGP.
• Enabled with MPLS or configured with VRF.
To import PE devices:
1. Click the Service tab.
2. From the navigation tree, select MPLS VPN Manager > VPN Resources > Region management.
The AS List page displays all ASs.
3. Click the name link of an AS.
The Sub-region/PE Device List page appears.
4. Click Import PE on top of the Sub-region/PE Device List area.
The Import Device page appears.
5. Enable or disable Filter devices according to AS number. If it is enabled, the system compares the
AS number of the imported device with the AS number of the current region. If the two AS numbers
are not the same, the device is not allowed to be imported.
6. Click Select to select the PE devices to be imported.
There are two methods for selecting devices, By View or using the Advanced option. See "
Adding
Devices by View " and " Adding Devices by Advanced Query ."
7. Highlight the devices you want to select and do one of the followings:
{
To add them to the Selected Devices list, click Add selected .
{
To select all of the devices displayed in the Devices Found list, click Add all .
{
To remove one or more, select them and click Remove selected .
{
To remove all of the selected devices, click Remove all .
8. Confirm that the devices you have found have been added.
9. Click OK to enter the Import Device page.
The selected devices now appear in the page.
10. Check the imported devices.
{
To add more devices, repeat step 6.
{
To delete devices, select one or multiple devices in the list, and click Remove.
11. Click OK.
The page for import progress appears. You can view the import process and result.
17