H3C Technologies H3C Intelligent Management Center - Manual (Page 106)

The PE Devices page displays all PE devices.
3. Enter or select one or more of the following query criteria:
{
Device Label—Enter the label of the PE to be queried. L2VPN Management supports fuzzy
matching for this field.
{
LSR ID—Enter the LSR ID of the PE to be queried. L2VPN Management supports fuzzy matching
for this field.
{
Device IP—Enter the IP address of the PE to be queried. L2VPN Management supports fuzzy
matching for this field.
{
Device Status—Select the alarm state of the PE to be queried. Options are All, Unmanaged,
Unknown, Normal, Warning, Minor, Major, and Critical.
4. Click Query.
The PE Devices displays all PEs matching the query criteria.
5. Click Reset to clear the query criteria and display all PEs.
Importing PE devices
Before importing PE devices, make sure the PE devices meet the following conditions:
• Enabled with SNMP.
• Added into IMC and managed by IMC.
• Not imported as CE devices.
• Enabled with MPLS, L2VPN, and MPLS L2VPN (not necessary for a PBB network), and configured
with LSR IDs.
To import PE devices:
1. Click the Service tab.
2. From the navigation tree, select L2VPN Manager > VPN Devices > PE Devices.
The PE Devices page displays all PE devices.
3. Click Import PE on top of the PE Devices area.
The Import Device page appears.
4. Click Select Device to select the PEs to be imported.
There are two methods for selecting devices, By View or using the Advanced option. See "
Adding
Devices by View " and " Adding Devices by Advanced Query ."
5. Highlight the devices you want to select and do one of the followings:
{
To add them to the Selected Devices list, click Add selected .
{
To select all of the devices displayed in the Devices Found list, click Add all .
{
To remove one or more, select them and click Remove selected .
{
To remove all of the selected devices, click Remove all .
6. Confirm that the devices you have found have been added.
7. Click OK to enter the Import Device page.
96