H3C Technologies H3C Intelligent Management Center - Manual (Page 144)

{
Last Synchronization Time—Time when the last synchronization occurred, in the format
YYYY-MM-DD hh:mm:ss.
{
Synchronization Status—Synchronization state of the CE, Synchronizing, Success, or Failed.
{
Operation—For a physical CE, this field displays the VLAN mapping icon . Click the icon to
enter the VLAN Mapping List page where you can configure the CVLAN-SVLAN mapping. For
a VCE, this field displays the Modify icon . Click the icon to enter the Modify MCE page.
3. Click Refresh to view the latest CE Device List.
Querying CE devices
1. Click the Service tab.
2. From the navigation tree, select L2VPN Manager > VPN Devices > CE Devices.
The CE Device List page displays all CE devices.
3. Enter or select one or more of the following query criteria:
{
Device Label—Enter the label of the CE to be queried. L2VPN Management supports fuzzy
matching for this field.
{
Device Status—Select the alarm state of the CE to be queried. Options are All, Unmanaged,
Unknown, Normal, Warning, Minor, Major, and Critical.
{
Device IP—Enter the IP address of the CE to be queried. L2VPN Management supports fuzzy
matching for this field.
{
CE Type—Select the type of the CE to be queried. Options are All, CE, and VCE.
4. Click Query.
The CE Device List displays all CEs matching the query criteria.
5. Click Reset to clear the query criteria and display all CEs.
Importing CE devices
Before importing CE devices, make sure the devices meet the following conditions:
• Enabled with SNMP.
• Added into IMC, and recognized and managed by IMC.
• Not imported as PE devices.
To import CE devices:
1. Click the Service tab.
2. From the navigation tree, select L2VPN Manager > VPN Devices > CE Devices.
The CE Device List page displays all CE devices.
3. Click Import CE on top of the CE Device List area.
The Import Device page appears.
4. Click Select Device to select the CEs to be imported.
134