H3C Technologies H3C Intelligent Management Center - Manual (Page 257)

• LSP Name—Indicates the LSP name.
• Audit Status—Indicates the audit status of the LSP. Values include Up, Down, Unknown,
Auditing, Testing, Dormant, Not Present, Lower Layer Down, and All.
• Monitoring Status—Indicates the LSP is monitored or not monitored. Values include
Monitored, Not monitored, and All.
• LSP Type—Indicates the type of the LSP. Values include Static, Dynamic, CR-LSP, and All.
MPLS Management supports fuzzy query function, which allows you to specify intact or partial
query condition.
4. Click Query. All LSPs matching this criteria are displayed in the LSP List section of the page.
5. Select the LSPs whose monitoring status is Not Monitored, and then click Monitor to monitor the
selected LSPs, or select LSPs whose monitoring status is Monitored, and then click Unmonitor to
unmonitor the selected LSPs.
6. To clear the query criteria and display all LSPs, click Reset.
NOTE:
An LSP that can be monitored refers to an LSP that has been successfully deployed. The LSP Traffic
Monitoring page only displays the deployed LSPs with the auditing status of UP.
LSP traffic reports
The MPLS Management component supports the query and export of LSP traffic reports. You can view the
traffic data of each LSP by viewing the LSP traffic reports. LSP traffic reports display traffic performances
and statistics for an LSP in forms of a table, line chart, and bar chart. The default is line chart.
To query LSP traffic reports:
1. Click Service > MPLS Management > LSP Traffic Statistics from the tabular navigation system on the
top of the IMC main page.
2. Click LSP Traffic Reports in the left navigation tree.
3. Enter query conditions In the Query Devices pane:
• LSP Name—Indicates the name of the LSP.
• LSP Type—Indicate the type of the LSP. Values include All, Static, Dynamic and CR-LSP.
MPLS Management supports fuzzy query function, which allows you to specify intact or partial
query condition.
4. Click Query. All LSPs matching this query criteria are displayed in the LSP Traffic List section.
The following list gives information for each item in the LSP Traffic List:
• LSP Name—Indicates the name of the LSP.
• LSP Type—Indicate the type of the LSP.
• Outgoing Traffic—Indicates the outgoing traffic in bytes per second.
• Operation—Indicates the operation that you can perform on this page.
5. Click the Details icon .
247