H3C Technologies H3C Intelligent Management Center - Manual (Page 150)

− To remove all of the selected devices, click Remove all .
d. Confirm that the devices you have found have been added.
e. Click OK to return to the page for selecting a PE.
f. To delete a device, click the Delete icon to which the device to be deleted corresponds. To
delete multiple devices, select the devices and click Delete.
4. Click Auto Discovery.
A process bar for VPN auto discovery appears.
5. Click Next when the loading is finished.
The VPN selection page appears.
6. Select VPNs whose links are to be configured:
a. View the VPN List Found.
VPN List Found contents
− Status—Status of the found VPN, Existed or New VPN. Existed indicates that the found VPN
already exists in L2VPN Management. New VPN indicates that a new VPN is found.
− VPN Name—Name of the found VPN.
− VPN Protocol Type—Type of the found VPN. This field displays BGP.
− ID Value—The vpn target information of the found VPN.
− PW Transport Mode—PW transport mode. Options are VLAN and Ethernet.
− VPN Description—Description of the found VPN.
b. Select one or multiple VPNs in the VPN List Found.
c. Click Next.
7. Configure VRF binding relationships.
This step configures CE information for the new links.
a. Select or clear the Create non-managed CE automatically box.
If you select the Create non-managed CE automatically box, the system automatically creates
a non-managed CE for a link without any CE device. If you clear the Create non-managed CE
automatically box, click the Modify icon in the New Link List to manually specify a CE
device for a link.
b. View the New Links List.
New Links List contents
− Device Label—Label and IP address of the PE device.
− VRF Name—Name of the found VRF.
− PE Interface—Name of the PE's interface that connects to the CE device.
− Service Instance ID—ID of the service instance.
− CE Name—Name of the CE device.
140