H3C Technologies H3C WX3000E Series Wireless Switches - Manual (Page 87)

71
does not reboot the device. In this case, you must save the current configuration manually
before you can reboot the device.
If you do not select the box, the system reboots the device directly.
Generating the diagnostic information file
Each functional module has its own running information, and generally, you need to view the output
information for each module one by one. To receive as much information as possible in one operation
during daily maintenance or when system failure occurs, the device supports generating diagnostic
information. When you perform the diagnostic information generation operation, the system saves the
running statistics of multiple functional modules to a file named default.diag, and then you can locate
problems faster by checking this file.
To generate the diagnostic information file:
1. Select Device > Device Maintenance from the navigation tree.
2. Click the Diagnostic Information tab.
The diagnostic information tab page appears.
Figure 48 Diagnostic information
3. Click Create Diagnostic Information File.
The system begins to generate diagnostic information file, and after the file is generated, the page
in
Figure 49 appears.
Figure 49 The diagnostic information file is created
4. Click Click to Download.
The File Download dialog box appears. You can select to open this file or save this file to the local
host.