H3C Technologies H3C WX3000E Series Wireless Switches - Manual (Page 382)

366
Figure 397 Configuring a radio group
4. Configure the radio group as described in Table 121 .
5. Click Apply.
Table 121 Configuration items
Item Description
Group ID ID of the radio group
Description
Description of the radio group
By default, a radio group has no description.
Channel
Holddown
Interval
Specify that the current channel keeps unchanged within the specified time after a channel
adjustment (manual, automatic, or initial channel selection).
IMPORTANT:
The AC immediately selects another channel when it detects any radar signals on the current
channel, and then resets the channel holddown timer.
Power
Holddown
Interval
Specify that the current power keeps unchanged within the specified time after a power
adjustment (manual or automatic power adjustment).
Radio List
• Select the target radios from the Radios Available area, and then click << to add them
into the Radios Selected area.
• Select the radios to be removed from the Radios Selected, and the click >> to remove
them from the radio group.