H3C Technologies H3C WX3000E Series Wireless Switches - Manual (Page 108)

92
Modifying a Layer 2 interface
1. Select Device > Interface from the navigation tree.
The page in
Figure 63 appears.
2. Click the icon corresponding to a Layer 2 interface.
The page for modifying a Layer 2 interface appears.
Figure 66 Modifying a Layer 2 physical interface
3. Modify the information about the Layer 2 physical interface as described in Table 38 .
4. Click Apply.
Table 38 Configuration items
Item Description
Port State
Enable or disable the interface.
In some cases, modification to the interface parameters does not take effect
immediately. You need to shut down and then bring up the interface to make the
modification work.