H3C Technologies H3C WX3000E Series Wireless Switches - Manual (Page 567)

551
Displaying guaranteed bandwidth settings
1. Select QoS > Wireless QoS from the navigation tree on the left.
2. Click Bandwidth Guarantee.
3. Click the specified radio unit of the AP on the list under the Bandwidth Guarantee title bar to view
the wireless services bound to the radio unit and the guaranteed bandwidth setting for each
wireless service.
Figure 578 Displaying guaranteed bandwidth settings
CAC service configuration example
Network requirements
As shown in Figure 579 , a WMM-enabled AP accesses the Ethernet.
Enable CAC for AC-VO and AC-VI on the AP. To guarantee high priority clients (AC-VO and AC-VI clients)
sufficient bandwidth, use the user number-based admission policy to limit the number of access users to
10.
Figure 579 Network diagram
Configuring the wireless service
1. Configure the AP, and establish a connection between the AC and the AP.
For related configurations, see "Configuring access services." Follow the steps in the related
configuration example to establish a connection between the AC and the AP.
Configuring wireless QoS
1. Select QoS > Wireless QoS from the navigation tree.
By default, the Wireless QoS tab is displayed.