H3C Technologies H3C WX3000E Series Wireless Switches - Manual (Page 610)

594
Figure 629 Network diagram
Configuration procedure
1. Before you configure load balancing, configure AP 1 and AP 2 on the AC to establish a
connection between the AC and each AP.
For the related configuration, see "Configuring access services."
2. Configure session-mode load balancing:
a. Select Advanced > Load Balance from the navigation tree.
b. On the Load Balance tab, select the Session mode, enter the threshold 5, and use the default
value for the gap.
c. Use the default values for Max Denial Count and RSSI Threshold.
d. Click Apply.
Figure 630 Setting session-mode load balancing