H3C Technologies H3C WX3000E Series Wireless Switches User Manual
Page 465
449
6.
Configure the profile as described in
7.
Click Apply.
Table 147 Configuration items
Item Description
Userprofile name
This field displays the user profile name.
Qos-out policy
Select a QoS policy in the outbound direction.
Qos-in policy
Select a QoS policy in the inbound direction.
limited-out rate
Specify the rate limit in the outbound direction.
limited-in rate
Specify the rate limit in the inbound direction.
Services permitted
Specify the wireless services permitted in the user profile:
Select the services in the Services list box and click the < button to add them to the
Selected services list box.
The available wireless services are those configured on the page you enter by
selecting Wireless Service > Access Service. For more information, see "Access
service configuration."
APs permitted
Specify the APs permitted in the user profile:
Select the APs in the APs list box and click the < button to add them to the Selected
APs list box.
The available APs are those you configured on the page you enter by selecting
AP > AP Group. For more information, see "AP configuration."
8.
From the page displaying the existing user profiles, select the option before the user profile to be
enabled.
9.
Click Enable.
NOTE:
•
By default, a newly added user profile is disabled.
•
A user profile takes effect and the authentication server notifies users of authentication results only after
the user profile is enabled. Therefore, if you do not enable the user profile, users using the user profile
will not be able to get online.
•
Only enabled user profiles can be referenced by users. Disabling a user profile logs out all users using
the user profile.
•
Enabled user profiles cannot be modified or removed. To modify or remove an enabled user profile, you
must disable it first.