Dhcp server configuration example, Network requirements, Configuration procedure – H3C Technologies H3C WX3000E Series Wireless Switches User Manual

Page 204

188

DHCP server configuration example

Network requirements

As shown in

, the DHCP client on subnet 10.1.1.0/24 obtains an IP address dynamically from

the DHCP server (AC). The IP address of VLAN-interface 2 of the AC is 10.1.1.1/24.
In subnet 10.1.1.0/24, the address lease duration is ten days and twelve hours and the gateway address

is 10.1.1.1.

Figure 169 Network diagram

Configuration procedure

Enable DHCP:

Select Network > DHCP from the navigation tree to enter the default DHCP Server page.

Select the Enable option for DHCP Service.

Figure 170 Enabling DHCP

Host

DHCP client

DHCP server

DHCP client

Vlan-int2

10.1.1.1/24

This manual is related to the following products:

H3C WX6000 Series Access Controllers H3C WX5000 Series Access Controllers H3C LSWM1WCM10 Access Controller Module H3C LSWM1WCM20 Access Controller Module H3C LSQM1WCMB0 Access Controller Module H3C LSRM1WCM2A1 Access Controller Module H3C LSBM1WCM2A0 Access Controller Module