H3C Technologies H3C WX3000E Series Wireless Switches - Manual (Page 272)

256
Figure 244 Viewing the online clients
Configuration guidelines
Select a correct district code.
Auto AP configuration example
Network requirements
As shown in Figure 245 , enable the auto-AP function to enable APs to automatically connect to the AC.
• The AP provides a clear type wireless service with the SSID service1.
• 802.11n(2.4GHz) radio mode is adopted.
Figure 245 Network diagram
Configuring the AC
1. Create an AP:
a. Select AP > AP Setup from the navigation tree.
b. Click Add.
c. On the page that appears, set the AP name to ap, select the AP model WA2620-AGN, select
the serial ID auto, and click Apply.