beautypg.com

H3C Technologies H3C WX3000E Series Wireless Switches User Manual

Page 72

background image

56

Field Description

HT protection mode

802.11n protection modes:

no protection mode(0)—The clients associated with the AP, and the

wireless devices within the coverage of the AP operate in 802.11n mode,

and all the clients associated with the AP operate in either 40 MHz or 20

MHz mode.

Non-member mode(1)—The clients associated with the AP operate in

802.11n mode, but non-802.11n wireless devices exist within the coverage

of the AP.

20 MHz mode(2)—The radio mode of the AP is 40 MHz. The clients

associated with the AP and the wireless devices within the coverage of the

AP operate in 802.11n mode, and at least one 802.11n client operating in
20 MHz mode is associated with the radio of the AP.

Non-HT mix mode(3)—All situations except the above three.

Short GI for 20MHz

Whether the AP supports short GI when it operates in 20 MHz mode.

Short GI for 40MHz

Whether the AP supports short GI when it operates in 40 MHz mode.

Mandatory MCS Set

Mandatory MCS for the AP.

Supported MCS Set

Supported MCS for the AP.

A-MSDU

Status of the A-MSDU function: enable or disable.

A-MPDU

Status of the A-MPDU function: enable or disable.

Configured Channel

Operating channel:

If the channel is manually configured, the configured channel number is

displayed.

If the channel is automatically selected, auto(channel) is displayed, where
channel is the optimal channel automatically selected by the AC.If the AP

operates in 802.11n radio mode and 40 MHz bandwidth mode, this field

displays the primary channel.

Configured Power(dBm)

Transmission power on the radio.

If one-time (transmit power control) is adopted, the configured transmit

power is displayed.

If auto TPC is adopted, two values are displayed, with the first being the

maximum power, and the second auto (number), where number in the

brackets represents the actual power.

Interference (%)

Interference observed on the operating channel, in percentage.

Channel Load (%)

Load observed on the operating channel, in percentage.

Utilization (%)

Utilization rate of the operating channel, in percentage.

Co-channel Neighbor Count

Number of neighbors found on the operating channel.

Channel Health

Status of the channel.

Preamble Type

Type of preamble that the AP can support: short or long.

Radio Policy

Radio policy used.

Service Template

Service template number.

SSID

SSID for the ESS.

Port

WLAN-DBSS interface associated with the service template.

Mesh Policy

Mesh policy adopted.