H3C Technologies H3C WX3000E Series Wireless Switches - Manual (Page 132)

116
Item Description
Write View
Select the write view of the SNMP group.
If no write view is configured, the NMS cannot perform the write
operations to all MIB objects on the device.
Notify View
Select the notify view of the SNMP group, that is, the view that can
send trap messages.
If no notify view is configured, the agent does not send traps to the
NMS.
ACL
Associate a basic ACL with the group to restrict the source IP address
of SNMP packets, that is, you can configure to allow or prohibit
SNMP packets with a specific source IP address, so as to restrict the
intercommunication between the NMS and the agent.
Configuring an SNMP user
1. Select Device > SNMP from the navigation tree.
2. Click the User tab.
The user tab page appears.
Figure 89 SNMP user
3. Click Add.
The Add SNMP User page appears.