H3C Technologies H3C WX3000E Series Wireless Switches - Manual (Page 431)

415
Figure 440 Network diagram
Configuration procedure
1. Configure a local user:
a. Select Authentication > Users from the navigation tree.
The local user management page appears.
b. Click Add.
c. Enter telnet the username.
d. Enter abcd as the password.
e. Enter abcd again to confirm the password.
f. Select Common User as the user type.
g. Select Configure as the level.
h. Select Telnet as the service type.
i. Click Apply.
Figure 441 Configuring the local user
2. Configure ISP domain test.
a. Select Authentication > AAA from the navigation tree.
The Domain Setup page appears, as shown in
Figure 442 .