H3C Technologies H3C WX3000E Series Wireless Switches - Manual (Page 116)

100
Port mirroring configuration task list
Table 41 Port mirroring configuration task list
Task Remarks
Add a mirroring group
Required.
For more information, see "
Adding a mirroring group ."
You need to select the mirroring group type local in the Type list.
Configure the mirroring ports
Required.
For more information, see "
Configuring ports for a mirroring group ."
During configuration, you need to select the port type Mirror Port.
Configure the monitor port
Required.
For more information, see "
Configuring ports for a mirroring group."
During configuration, you need to select the port type Monitor Port.
Adding a mirroring group
1. Select Device > Port Mirroring from the navigation tree.
2. Click the Add tab.
The page for adding a mirroring group appears.
Figure 71 The page for adding a mirroring group
3. Configure the mirroring group as described in Table 42 .
4. Click Apply.