H3C Technologies H3C WX3000E Series Wireless Switches - Manual (Page 350)

334
Figure 364 Mesh calibration interval
2. Configure mesh DFS:
a. Select Wireless Service > Mesh Service from the navigation tree.
b. Click the Global Setup tab.
c. On the page that appears, select the Manual box for Dynamic Channel Select.
d. Click OK.
Figure 365 DFS
3. Enable one time DFS for the mesh network:
a. Select Wireless Service > Mesh Service from the navigation tree.
b. Click the Mesh Channel Optimize tab.
c. Select the outdoor mesh network.
d. Click Channel Optimize.
Figure 366 One-time mesh DFS