H3C Technologies H3C WX3000E Series Wireless Switches User Manual

Page 106

Figure 65 Creating an interface

Configure the interface as described in

Table 37

Click Apply.

Table 37 Configuration items

Item Description

Interface Name

Set the type and number of a logical interface.

VID

If you are creating a Layer 3 Ethernet subinterface, set the VLANs associated with
the subinterface.
This parameter is available only for Layer 3 Ethernet subinterfaces.

IMPORTANT:

Currently, this configuration item is not configurable because the device does not

support Layer 3 Ethernet subinterfaces.

MTU

Set the maximum transmit unit (MTU) of the interface.
The MTU value affects fragmentation and reassembly of IP packets.

IMPORTANT:

Support for this configuration item depends on the interface type. All Layer 3 interfaces

support MTU.

This manual is related to the following products:

H3C WX6000 Series Access Controllers H3C WX5000 Series Access Controllers H3C LSWM1WCM10 Access Controller Module H3C LSWM1WCM20 Access Controller Module H3C LSQM1WCMB0 Access Controller Module H3C LSRM1WCM2A1 Access Controller Module H3C LSBM1WCM2A0 Access Controller Module