H3C Technologies H3C WX3000E Series Wireless Switches - Manual (Page 372)

356
Locking the power
1. Select Radio > Radio from the navigation tree to enter the page as shown in Figure 392 .
Figure 392 Locking the current power
2. Select the box of the target radio.
3. Click Lock Power.
For transmission power configuration, see " Configuring radio parameters ."
If you lock the current power first, and then enable power adjustment, power adjustment does
not work because the power is locked. Therefore, before enabling power adjustment, make
sure that the current power is not locked. If you enable power adjustment, and then lock the
current power, the last selected power is locked. For information about power adjustment, see
"
Transmit power control ." For how to configure power adjustment, see " Parameter setting ."
Configuring data transmit rates
Configuring 802.11a/802.11b/802.11g rates
1. Select Radio > Rate from the navigation tree to enter the rate setting page.