Configuration procedure – H3C Technologies H3C WX3000E Series Wireless Switches User Manual
Page 390
374
•
Configure automatic power adjustment so that the AC can automatically adjust the power when the
third neighbor is discovered (or in other words, when AP 4 joins) to avoid interference.
•
Add radio 2 of AP 1 and radio 2 of AP 2 to a radio group to prevent frequent channel or power
adjustments for the radios.
Figure 407 Network diagram
Configuration procedure
1.
Before you configure a radio group, configure AP 1 through AP 3 on the AC to establish a
connection between the AC and each AP.
For the related configuration, see "Access service configuration."
2.
Configure automatic channel and power adjustment:
a.
Select Radio > Calibration from the navigation tree.
b.
Click the Parameters tab.
c.
Select Auto from the Dynamic Channel Select list, select Auto from the Dynamic Power Select list,
and click Apply.