H3C Technologies H3C WX3000E Series Wireless Switches User Manual

Page 34

Figure 12 AP configuration page

Table 12 Configuration items

Item Description

AP Name

Enter the name of the AP.

Model

Select the model of the AP.

Serial ID

Specify the serial ID of the AP.

•

If the Auto box is not selected, you need to manually enter a serial ID.

•

If the Auto box is selected, the AC automatically searches the serial ID of the AP.

This option needs to cooperate with the auto AP function to implement
automatic AP discovery so that the AP can connect with the AC automatically.

If there are a large number of APs, the automatic AP discovery function can

avoid repeated configuration of AP serial numbers. For how to configure auto

AP, see "AP configuration."

Country/Region Code

Select a country/region code for the AP.
By default, no country/region code is configured for the AP and the AP uses the

global country/region code (which is configured on the AC). If the country/region
code is specified on this page, the AP uses this configuration. For information

about the country/region code configured on the AC, see "Advanced settings."

Radio

Radio unit of the AP.

Mode

Select the radio mode. The radio mode depends on the AP model.

This manual is related to the following products:

H3C WX6000 Series Access Controllers H3C WX5000 Series Access Controllers H3C LSWM1WCM10 Access Controller Module H3C LSWM1WCM20 Access Controller Module H3C LSQM1WCMB0 Access Controller Module H3C LSRM1WCM2A1 Access Controller Module H3C LSBM1WCM2A0 Access Controller Module