H3C Technologies H3C WX3000E Series Wireless Switches - Manual (Page 441)

425
Table 141 Configuration items
Item Description
Server Type
Select the type of the RADIUS server to be configured. Possible values include
primary authentication server, primary accounting server, secondary
authentication server, and secondary accounting server.
IP Address Specify the IP address of the RADIUS server.
Port Specify the UDP port of the RADIUS server.
Key
Specify the shared key for communication with the RADIUS server.
If no shared key is specified here, the shared key specified in the common
configuration part is used.
Confirm Key
RADIUS configuration example
Network requirements
As shown in Figure 449 , a RADIUS server running on IMC uses UDP ports 1812 and 1813 to provide
authentication and accounting services respectively.
Configure the AC to use the RADIUS server for Telnet user authentication and accounting, and to remove
domain names from the usernames sent to the server.
On the RADIUS server, configure a Telnet user account with the username hello@bbb and the password
abc, and set the EXEC privilege level to 3 for the user.
Set the shared keys for packet exchange between the AC and the RADIUS server to expert.
Figure 449 Network diagram
Configuration procedure
1. Configure RADIUS scheme system:
a. Select Authentication > RADIUS from the navigation tree.
b. Click Add.
c. Enter the scheme name system, select the server type Extended, and select the username format
Without domain name.
d. In the RADIUS Server Configuration area, click Add to enter the RADIUS server configuration
page.
e. Select the server type Primary Authentication, enter 10.1.1.1 as the IP address of the primary
authentication server, 1812 as the port number, and expert as the key, and click Apply to add
the primary authentication server to the scheme.