Configuring a rule for an advanced ipv6 acl – H3C Technologies H3C WX3000E Series Wireless Switches User Manual
Page 522
506
Item
Description
Source IP Address
Select the Source IP Address option and enter a source IPv6 address and prefix
length.
The IPv6 address must be in a format like X:X::X:X. An IPv6 address consists of eight
16-bit long fields, each of which is expressed with two hexadecimal numbers and
separated from its neighboring fields by colon (:).
Source Prefix
Time Range
Select the time range during which the rule takes effect.
Configuring a rule for an advanced IPv6 ACL
1.
Select QoS > ACL IPv6 from the navigation tree
2.
Click the Advanced Setup tab to enter the rule configuration page for an advanced IPv6 ACL.
Figure 539 Configuring a rule for an advanced IPv6 ACL
3.
Configure the advanced IPv6 ACL rule information, as described in
4.
Click Add.