H3C Technologies H3C WX3000E Series Wireless Switches - Manual (Page 511)

495
Recommended IPv6 ACL configuration procedure
Step Remarks
1. Adding a time range
Optional.
A rule referencing a time range takes effect only
during the specified time range.
2. Adding an IPv6 ACL
Required.
The category of the added IPv6 ACL depends on the
ACL number that you specify.
3. Configuring a rule for a basic IPv6 ACL
Required.
Complete one of the steps according to the ACL
category.
4. Configuring a rule for an advanced IPv6 ACL
Adding a time range
1. Select QoS > Time Range from the navigation tree.
2. Click the Add tab to enter the time range adding page.
Figure 532 Adding a time range
3. Configure the time range information, as described in Table 163 .
4. Click Apply.
Table 163 Configuration items
Item Description
Time Range Name Set the name for the time range.