Configuration examples, Network requirements, Adding a mirroring group – H3C Technologies H3C WX3000E Series Wireless Switches User Manual
Page 118
102
Item Description
Stream Orientation
Set the direction of the traffic monitored by the monitor port of the mirroring group.
This configuration item is available when Mirror Port is selected is the Port Type list.
•
both—Mirrors both received and sent packets on mirroring ports.
•
inbound—Mirrors only packets received by mirroring port.
•
outbound—Mirrors only packets sent by mirroring ports.
interface name
Select the ports to be configured from the interface name list.
Configuration examples
Network requirements
As shown in
, the customer network is as described below:
•
Packets from AP access AC through GigabitEthernet 1/0/1.
•
Server is connected to GigabitEthernet 1/0/2 of AC.
Configure port mirroring to monitor the bidirectional traffic on GigabitEthernet 1/0/1 of AC on the
server.
To satisfy the above requirement through port mirroring, perform the following configuration on AC:
•
Configure GigabitEthernet 1/0/1 of AC as a mirroring port.
•
Configure GigabitEthernet 1/0/2 of AC as the monitor port.
Figure 73 Network diagram
Adding a mirroring group
1.
Select Device > Port Mirroring from the navigation tree.
2.
Click Add.
The page for adding a mirroring group appears.