H3C Technologies H3C WX3000E Series Wireless Switches - Manual (Page 404)

388
TIP:
On the page shown in Figure 415 , the portal service applied on a Layer 3 interface can be in either of the
following states:
• Running—Portal authentication has taken effect on the interface.
• Enabled—Portal authentication has been enabled on the interface but has not taken effect.
2. Click Add to enter the portal service application page.
Figure 416 Portal service application
3. Configure the portal application settings as described in Table 129 .
4. Click Apply.
Table 129 Configuration items
Item Description
Interface Specify the Layer 3 interface to be enabled with portal authentication.
Portal Server
Specify the portal server to be applied on the specified interface. Options include:
• Select Server—Select an existing portal server from the Portal Server list.
• New Server—If you select this option from the list, the portal server configuration area,
as shown in Figure 417 , will be displayed at the lower part of the page. You can add
a remote portal server and apply the portal server to the interface. For detailed
configuration, see Table 130 .
• Enable Local Server—If you select this option from the list, the local portal service
configuration area, as shown in Figure 418 , will be displayed at the lower part of the
page. You can configure the parameters for local portal service. For detailed
configuration, see
Table 131 .