H3C Technologies H3C WX3000E Series Wireless Switches User Manual
Page 335
319
Figure 340 Mesh policy detailed information
Table 107 Field description
Field Description
MP Policy Name
Name of the mesh policy.
Mesh Link Initiation
Whether link initiation is enabled or not.
Mlsp
Mobile Link Switch Protocol (MLSP) status, which can be:
•
Enable—Indicates that MLSP is enabled.
•
Disable—Indicates that MLSP is disabled.
Authenticator Role
Authenticator role status, which can be:
•
Enable—Indicates that the authenticator role is enabled.
•
Disable—Indicates that the authenticator role is disabled.
Max Links
Maximum number of links on a device using this mesh policy.
Probe Request Interval (ms)
Interval between probe requests sent by a device using this
mesh policy.
Link Hold RSSI
Link hold RSSI.
Link Hold Time (ms)
Link hold time.
Link Switch Margin
Link switch margin.
Link saturation RSSI
Link saturation RSSI.
Link rate-mode
Method of calculating the link cost, which can be:
•
Fixed—Indicates that the mesh interface rate is fixed.
•
real-time—Indicates that the mesh interface rate changes
with the RSSI in real-time.