H3C Technologies H3C WX3000E Series Wireless Switches - Manual (Page 262)

246
Item Description
Domain
Select an existing domain from the list.
The default domain is system. To create a domain, select
Authentication > AAA from the navigation tree, click the Domain Setup
tab, and enter a new domain name in the Domain Name field.
• The selected domain name applies to only the current wireless
service, and all clients accessing the wireless service use this
domain for authentication, authorization, and accounting.
• Do not delete a domain name in use. Otherwise, the clients that
access the wireless service will be logged out.
Pre-shared Key
• pass-phrase—Enter a PSK in the form of a character string. You must
enter a string that can be displayed and is of 8 to 63 characters.
• raw-key—Enter a PSK in the form of a hexadecimal number. You
must enter a valid 64-bit hexadecimal number.
b. Configure psk
Figure 231 psk port security configuration page
Table 98 Configuration items
Item Description
Port Mode
psk—An access user must use the pre-shared key (PSK) that is
pre-configured to negotiate with the device. The access to the port is
allowed only after the negotiation succeeds.
Max User
Control the maximum number of users allowed to access the network
through the port.
Pre-shared Key
• pass-phrase—Enter a PSK in the form of a character string. You must
enter a string that can be displayed and is of 8 to 63 characters.
• raw-key—Enter a PSK in the form of a hexadecimal number. You must
enter a valid 64-bit hexadecimal number.
c. Configure userlogin-secure-ext
Perform the configurations as shown in Configure userlogin-secure/userlogin-secure-ext .