H3C Technologies H3C WX3000E Series Wireless Switches User Manual

Page 420

404

Select the box before ap1 with the radio mode of 802.11g.

Click Enable.

Figure 433 Enabling 802.11g radio

11.

Configure portal authentication

From the navigation tree, select Authentication > Portal.

Click Add.

Select interface Vlan-interface2, select Enable Local Server for Portal Server, select Direct as
the authentication method, select the authentication domain test, enter 192.168.1.1 as the

server IP address, select HTTPS as the protocol type, select test as the PKI domain, select the

box before Page Customization, and select the authentication page file ssid1.zip for SSID abc.

Click Apply.

This manual is related to the following products:

H3C WX6000 Series Access Controllers H3C WX5000 Series Access Controllers H3C LSWM1WCM10 Access Controller Module H3C LSWM1WCM20 Access Controller Module H3C LSQM1WCMB0 Access Controller Module H3C LSRM1WCM2A1 Access Controller Module H3C LSBM1WCM2A0 Access Controller Module