H3C Technologies H3C WX3000E Series Wireless Switches - Manual (Page 119)

103
Figure 74 Adding a mirroring group
3. Enter 1 for Mirroring Group ID and select Local in the Type list.
4. Click Apply.
Configuring the mirroring ports
1. Click Modify Port.
The page for configuring a mirroring port appears.
Figure 75 Configuring a mirroring port
2. Select 1 – Local for Mirroring Group ID, select Mirror Port for Port Type, select both for Stream
Orientation, and select GigabitEthernet 1/0/1 from the interface name list.
3. Click Apply.
The progress bar appears.
4. Click Close after the progress bar prompts that the configuration is complete.