H3C Technologies H3C WX3000E Series Wireless Switches User Manual
Page 501
485
d.
Click Apply.
Figure 522 AP configuration
e.
Select Security > Rogue Detection from the navigation tree.
f.
Select Security > Rogue Detection from the navigation tree.
g.
On the AP Monitor tab, click the
icon corresponding to the target AP to enter the operating
mode configuration page.
h.
Select the operating mode Monitor.
i.
Click Apply.
Figure 523 AP operating mode configuration
3.
Enable the 802.11n(2.4GHz) radio mode:
a.
Select Radio > Radio from the navigation tree to enter the AP radio configuration page.
b.
Select the AP with the radio mode 802.11n(2.4GHz.
c.
Click Enable.
Figure 524 Radio configuration
This manual is related to the following products: